Professional TV equipment design, development and production.

 
     
   

Products by family
 		  

 

Products by topic

 

Main / Matrix switchers / PSOE-3232-3G

PSOE-3232-3G series 3G/HD/SD SDI/DVB-ASI routers
with SFP-type electrical and/or optical inputs/outputs

PSOE-3232-3G series 3G/HD/SD SDI/DVB-ASI matrix routing switcher connects any of its' 32 inputs to any combination of its' 32 outputs.
Maximum matrix capacity is 32 by 32.

Because of the SFP-type modules being used as inputs and outpurs, a user may choose any desired combination of optical or electrical connections.

    The following is a list of suggested SFP modules for PSOE-3232:
  • Inputs
    Port
    Type
    Channel number
    SFP model ID
    Sensitivity at 2.97Gbps
    input
    electrical
    2
    		 PRFT-C30-DR-B-DN
    up to 120 meters of Belden 1694A
    optical
    2
    		 PRFT-30-DR-DN
    -20~-3dBm
    optical
    2
    		 PRFT-30-DRH-DN
    -28~-9dBm
  • Outputs
    Port
    Type
    Channel number
    SFP model ID
    Laser type and wavelength (nm)
    Output power
    output
    electrical
    2
    		 PRFT-C30-DT-B-DN
    optical
    2
    		 PRFT-1330DT-10DN
    1330nm, FP
    -5~0dBm
    optical
    2
    		 PRFT-1330DT-35DN
    1330nm, FP
    0~+3dBm
    optical
    2
    		 PRFT-1530DT-50DN
    1550nm, DFB
    0~+3dBm
    optical
    2
    		 PRFT-1630DT-xxDN
    CWDM, DFB
    0~+3dBm

A customer selects his particular I/O configuration (which input or output is electrical or optical) to place an order for a device.

The hot-swappable capability of SFP modules allows a user to trim his configuration later in the field by replacing some or all modules to a different type (optical vs electrical). This also allows to start with a minimum number of SFPs pre-installed and later upgrade the capacity up to 32x32 by inserting more SFPs.

PSOE-3232-3G is compatible with all "PROFITT"s remote panels (Ethernet capable) and may be controlled from any number of such panels simultaneously or from a PC via Ethernet.

    Compatible panels come in three classes:
  • general X-Y type remote panels:
    X-capacity
    Y-capacity
    model
    rack size
    up to 999
    up to 999
    		PRR-1000
    2U
    up to 999
    up to 999
    		PRR-1000-2
    2U
    32
    32
    		 PRR-3232
    2U
    32
    32
    PRR-3232P*
    3U
    32
    16
    PRR-3216P*
    3U
    32
    8
    		 PRR-3208
    2U
    32
    4
    		 PRR-3204  
    2U
    *) denotes enlarged (18mm*18mm) buttons.
  • multi bus type remote panel:
    X-capacity
    Y-capacity
    model
    rack size
    32
    2
    		 PRR-3202
    2U
  • single bus remote panels:
    X-capacity
    Y-capacity
    model
    rack size
    32
    1
    		 PRR-3201M
    2U
    32
    1
    		 PRR-3201
    1U
    32
    1
    		 PRR-3201PM
    3U

Features

  • two-channel SFP modules as Inputs/Outputs
  • electrical and/or optical SFP modules
  • APD optical receivers (-30dBm sensitivity) available
  • SFP optical transmitters with FP and DFB lasers (1330nm, 1550nm, CWDM or DWDM wavelengths)
  • DDMI real-time monitoring of all SFPs' statuses
  • real-time monitoring of input optical power at any SFP optical receiver
  • laser wavelengths and output optical power at any SFP optical transmitter
  • all SFP modules are hot-swappable
  • automatic cable equaliser
  • reclocker and reshaper on every input
  • redundant PSU
  • monitoring of supply voltages and current consumption
  • monitoring of in-rack temperature
  • fan RPM monitoring
  • RP-168 compliant switching point (requires REF signal)
  • HDMI monitor output (3G/HD/SD SDI only)
    • standard autodetection
    • SDIembedded audio group number detection
    • audio group selection for 8-channel audio level meter OSD
    • quazi-peak or UV audio lever meter OSD on HDMI monitor output
    • user-selectable dBu/DBFS scale
    • independently presettable level for audio overload indication
    • HDMI monitoring of #1 or #2 stream in 3G Level B signal

Technical specifications

  • Inputs
    • Standard compliance
      • SMPTE 425M: 3G Level A, B 4:2:2, 3G 4:4:4
      • SMPTE 274M: 1920*1080 HD SDI
      • SMPTE 296M: 1280*750 HD SDI
      • SMPTE 295M: 1920*1080 HD SDI
      • SMPTE 260M: 1920*1035 HD SDI
      • SMPTE 259M: 720*576/50i, 720*480/60i SD SDI
      • DVB-ASI
    • media
      • electrical:
        • type: eSFP, PRFT-C30-DR-B-DN
        • connectors: two HD BNC, 75 Ohm
        • cable equaliser:
          • at 2.97Gbps: up to 120 meters of 8281 or similar
          • at 1.5Gbps: up to 140 meters of 8281 or similar
          • at 270Mbps: up to 400 meters of 8281 or similar
      • optical:
        • type: SFP
          •   PRFT-30-DR-DN PRFT-30-DRH-DN
          spectral sensitivity
          1100~1650nm
          1100~1650nm
          optical input dynamic range
          (at 3Gbps)
          -24~-3dBm
          -28~-9dBm
          optical connector
          two LC/PC
          two LC/PC
    • REF signal input
      • type: DC restored
      • connector: BNC
      • input impedance: >10 kOhm
      • signal type: HD tri-level, SD "blacl burst"
  • Outputs
    • Standard compliance: as per input, reclocked, less than 0.2UI jitter
    • media
      • electrical:
        • type: eSFP, PRFT-C30-DT-B-DN
        • connectors: two HD BNC, 75 Ohm
        • return loss: better than 12dB at 1.5GHz
        • signal amplitude: 800mV ±10%
        • signal rise/fall times: 270pS for HD SDI, 700pS for SD SDI
      • optical:
        • type: SFP
          •   PRFT-1330DT-10DN PRFT-1330DT-35DN PRFT-1530DT-50DN PRFT-1630DT-xxDN
          laser type
          FP
          FP
          DFB
          DFB
          wavelength
          1310±20nm
          1310±20nm
          1550±20nm
          CWDM
          optical power
          -5~0dBm
          0~+3dBm
          0~+3dBm
          0~+3dBm
          optical connector
          LC/PC
          LC/PC
          LC/PC
          LC/PC
    • HDMI monitor with audio level meter OSD
      • Standard compliance
        • 3G Level A: 1080p/50, 1080p/59.94, 1080p/60
        • 3G Level B: 1080p/50, 1080p/59.94, 1080p/60, 1080p/25, 1080p/29.9, 1080p/30, 1080PsF/25, 1080PsF/29.9, 1080PsF/30, 1080i/50, 1080i/59.94, 1080i/60
        • HD SDI: 1080i/50, 1080i/59.9, 1080i/60, 1080P/25, 1080P/29.9, 1080P/30, 1080PsF/25, 1080PsF/29.9, 1080PsF/30, 1035i/59.9, 1035i/60, 720P/50, 720P/59.9, 720P/60
        • SD SDI: 576i/50, 480i/60
  • Remote controls and management
    • 100Mbps Ethernet, proprietary protocol via TCP/IP on port #10004
  • Mechanical data
    • weight: 5kg
    • dimentions (WHD): 482mm*44mm*260mm
  • Operational temperature range: from 0° to 45°C
  • Power consumption: less than 35W, 220 VAC mains

General description

PSOE-3232-3G rear panel view

The eSFP and SFP connectors close-up view

    On the real panel of PSOE-3232 are located:
  • ~220 V power cord socket (POWER) with a fuse holder and ON/OFF button
  • 32 slots for SFPs - 16 in the INPUT row and 16 in the OUT row
  • HDMI monitor output connector
  • RJ-45 connector for 10/100 BaseT Ethernet

Simplified schematic

PSOE-3232-3G simplified schematic

    Legend:
  • RECLOCK - reclocker
  • VU METR & OSD - audio level meter bargraph OSD generator

Managing the PSOE-3232

PSOE-3232 is controllable with all "PROFITT"s remote panels (Ethernet capable) and may be controlled from any number of such panels simultaneously or from a PC via Ethernet.

Managing the PSOE-3232 locally

Frontal view of the PSOE-3232 motherboard edge (lid removed)

All controls are located on the frontal edge of the PSOE-3232 motherboard.

    Indicators
  • INP - when lit an SDI signal is detected on HDMI monitor output
  • AUD DET - when lit an SDI signal with embedded audio is detected on HDMI monitor output

Configuration of PSOE-3232

Toggling the MODE button select a parameters page. Pressing the UP and DOWN buttons edit parameters' values.

  • Status page
    • Standard display (upper line)
      • 3G Level A HD SDI, shown as "3G-A": 1080p/50, 1080p/59.94, 1080p/60, 1080p/24, 1080p/23.98, 1080I/50, 1080I/59.94, 1080I/60, 720p/50, 720p/60, 720p/59.94, 720p/25, 720p/24, 720p/23.98
      • 3G Level B HD SDI, shown as "3G-B": 1080i/(50, 60, 59.94), 1080p/(50, 60, 59.94) and 1080PsF/(25, 30, 29.97) abbreviated to 1080/(50, 60, 59.94), 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98, 1080PsF/24, 1080PsF/23.98
      • HD SDI: 1080i/50, 1080i/60, 1080i/59.94, 1080p/25, 1080p/25-EM, 1080p/30, 1080p/29.97, 1080p/24, 1080p/24-EM, 1080p/23.98, 1080p/23.98-EM, 1080PsF/25-EM, 1080PsF/24, 1080PsF/24-EM, 1080PsF/23.98, 1080PsF/23.98-EM, 1920x1035i/59.94, 720p/50, 720p/50-EM, 720p/60, 720p/60-EM, 720p/59.94, 720p/59.94-EM, 720p/25, 720p/25-EM, 720p/30, 720p/30-EM, 720p/29.97, 720p/29.97-EM, 720p/24, 720p/24-EM, 720p/23.98, 720p/23.98-EM
      • SD SDI: 625i/50, 525i/59.9
    • SDIembedded audio group numbers (lower line)
      • a digit in a bracket denotes an audio group detected, as follows: GR [1][2][-][-] - the first and second audio groups only present
  • VU METER 1 settings page
    • use UP/DOWN buttons to enable/disable (ON/OFF) the VU METER 1 OSD
  • IND 1 ASSIGN audio group selector for the 1st OSD
    • use UP/DOWN buttons to select from GROUP 1 / GROUP 2 / GROUP 3 / GROUP 4
  • IND 1 POS the 1st OSD screen position adjust
    • use UP/DOWN buttons to place OSD on a screen
  • VU METER 2 settings page
    • use UP/DOWN buttons to enable/disable (ON/OFF) the VU METER 1 OSD
  • IND 2 ASSIGN audio group selector for the 2nd OSD
    • use UP/DOWN buttons to select from GROUP 1 / GROUP 2 / GROUP 3 / GROUP 4
  • IND 2 POS the 2nd OSD screen position adjust
    • use UP/DOWN buttons to place OSD on a screen
  • VU METER SCALE scale selector page
    • use UP/DOWN buttons to select:
      • DB FS - EBU norm, 0 DBFS equals to +18dBU
      • DBU - quazi-alaog scale, 0 dBU equals to 0.775Vrms
  • VU REF DBFS nominal level adjust page
    • use UP/DOWN buttons to adjust the nominal level indication threshold:
      • 0, -1, -2, -3, -4, -5, -6, -7, -8, -9, -10, -12, -14, -16, -18, -20, -22, -24, -26 or -30 DBFS
  • VU REF DBU nominal level adjust page
    • use UP/DOWN buttons to adjust the nominal level indication threshold:
      • +9, +8, +7, +6, +5, +4, +3, +2, +1, +0, -1, -2, -3, -4, -5, -6 , -8 , -10 , -12, -14 or -16 DBU
  • 3G B stream selector page
      3G Level B signal carries two 1.485Gbps streams - Stream 1 and Stream 2
    • use UP/DOWN buttons to select Stream 1 or Stream 2 for HDMI monitoring
  • REF signal status page
    • statuses: LOSS, 625i/50, 525i/59.9, 625p/50, 525p/59.9, 1080 i , 720 p , 1080 p or Unknown
  • POWER 1 status page of the main PSU
    • power consumption (amperes) from the main PSU (the right-hand side, looking at the rear panel)
  • POWER 2 status page of the redundant PSU
    • power consumption (amperes) from the redundant PSU (the left-hand side, looking at the rear panel)
  • Voltage status page
    • PSUs nominat output voltage is +12V, the current value is shown. OK value is +12±0.5V
  • Temperature display page
    • The in-rack temperature is shown in Celsius
  • Fan speed 1 / Fan speed 2 display page
    • RPMs of each fan is displayed
  • IP address display page
    • the assigned value of IP address is displayed. Use the profitt_di.exe utility to manage it
  • Port display page
    • the TCP/IP port value is 10004 fixed and cannot be changed
  • Firmware display page
    • unit's name and firmware version display, PSOE-3232 vX.Y
2019 PROFITT Ltd