|
Main / Encoders, transcoders / PENC-3005
PENC-3005 series SDI-to-PAL/SECAM encoders |
PROFLEX™ PENC-3005 series SDI-to-PAL/SECAM/YC encoders accept D1 270Mbit SDI signal to encode into PAL, SECAM or Y/C.
Features
- 10-bits digital video processing
- SNR better than 63dB
- broadcast quality DAC at 54MHz
- adaptive notch filter (SECAM only)
- flat luminance channel frequency response: roll-off less than -0.2dB at 5,75MHz
- full chrominance channel bandwith
- two modes of PAL color subcarrier generation:
- autonomous, ITU-R BT.470-2 compliant
- external REF signal driven
- PAL color subcarrier phase manual adjustment: 360° with 0,3° steps
- PAL output signal phase adjustment to the external REF signal capability:
- built-in VITS generator with full-field insertion capability
- built-in colorbar generator
- VBI contents pass-through or blanking mode
- local and remote control
PENC-3005 rear panel view:
Technical specifications
SDI inputs
Standard compliance |
ITU-R BT.656 |
Connectors, input impedance |
BNC, 75 Ohm |
Return loss |
>18dB at 270MHz |
Cable equalization |
up to 300 meters of 8281 or similar |
Composite outputs
Standards |
PAL,SECAM |
Number of outputs |
two composite or one YC |
Connectors, output impedance |
BNC, 75 Ohm |
Return loss |
better than 40dB at 4,43MHz |
REF input
Signal type |
"black burst" PAL or SECAM |
Connectors |
BNC, pass-through |
Signal amplitude |
(0,3 ~ 2)V |
Video parameters
Luminance channel frequency response |
SECAM (notch filter ON) |
1,0MHz |
2,0MHz |
3,0MHz |
4,0MHz |
4,286MHz |
4,8MHz |
5,8MHz |
± 0,1dB |
±0,1dB |
±0,5dB |
-(6±2)dB |
-(16±2)dB |
-(3±1)dB |
-0,5dB |
PAL |
0,5dB up to 5,8MHz |
2T K-factor |
<0,5% |
Diff gain |
<1% |
Diff phase |
<1% |
SNR |
better than 63dB, weighted |
Color error |
PAL |
<2% |
SECAM |
ITU-R BT.470-2 and GOST 7845-92 compliant |
LUMA to CHROMA skew |
less than 5ns |
Signal representation |
10 bits |
DAC sampling rate |
54MHz |
PAL color subcarrier phase adjustment |
360° with 0,3° steps |
|