|
|
Main / Optical interfaces / PORC-7223
| PORC-7223 3G/HD/SD SDI/DVB-ASI optical receivers with auxiliary HDMI output |
PROFLEX™ PORC-7223 series 3G/HD/SD SDI/DVB-ASI optical receivers accept the single-mode optical fiber signal to demodulate the 3G/HD/SD SDI/DVB-ASI signal.
The optical input of PORC-7223 is based on the hot-swappable SFP module with the RX power monitoring facility.
The PORC-7223 module occupies one slot in the PROLFEX 1U/3U racks so that up to four receivers fit into a 1U rack and up to fifteen into a 3U rack.
The PORC-7223 receiver is WDM/CWDM/single-signal compatible.
The PORC-7223 is featuring the monitoring HDMI output with the OSD of the bar-graph audio level meters (quasi-peak and VU).
PORC-7223 rear panel:
PORC-7223 simplified schematic diagram:
PORC-7223 accepts the optical signal on it's SFP RX module, which demodulates the input signal down to 3G/HD/SD SDI/DVB-ASI electrical form. The signal is processed by a video/audio processor. The video/audio processor deembedds the audio data streams. The audio may be monitored at the analog output. The 3G/HD/SD SDI/DVB-ASI video is available on two reclocked outputs.
Features:
- 3G/HD/SD SDI/DVB-ASI compliance
- electrical (3G/HD/SD SDI/DVB-ASI and HDMI) outputs are available simultaneously
- user configurable reclocked or raw SDI/DVB-ASI outputs
- hot-swappable SFP module as optical input device
- the APD sensor modification available
- high optical sensitivity
- realtime optical RX power monitoring
- signal loss indicator
- EDH/CRC status indicators
- automatic detection and indication of an embedded audio
- audio group selection for the OSD bargraph audio level meter
- bargraph audio level meter (quazi-peak and UV) OSD on HDMI monitor output
- dBU or dBFS user-selectable scale with adjustable reference level
- 3G Level B only: stream#1 or stream#2 selection for monitoring on HDMI output
- compatibility with a single-signal, WDM and CWDM optical systems
Note: Always use the LC-type attennuator(s) at transmitters' output or receivers' input if the receivers' input optical power exceeds the -3dBm (for PORC-7223SFP) or -9dBm (for PORC-7223SFPA) level to avoid the receivers' sensor damage and sensitivity loss.
Technical specifications
- Inputs
- Optical
| Standard compliance |
SMPTE 425M |
3G level A, B 4:2:2 |
| 3G 4:4:4 |
| SMPTE 274M (HD SDI) |
1920*1080 |
| SMPTE 296M (HD SDI) |
1280*750 |
| SMPTE 295M (HD SDI) |
1920*1080 |
| SMPTE 260M (HD SDI) |
1920*1035 |
| SMPTE 259M (SD SDI) |
720*576/50i |
| 720*480/60i |
| DVB-ASI |
| optical sensitivity spectral range |
1100~1650nm |
| data throughput |
up to 3Gbps |
| usable input optical power range |
PORC-7223 |
-(3~24)dBm |
| PORC-7223A |
-(9~28)dBm |
| optical fiber connector |
SFP LC/PC |
- Outputs
- SDI/DVB-ASI
| standard compliance |
as per input |
| number of outputs |
two, reclocked or raw |
| output return loss |
better than 12dB at 1.5GHz |
| amplitude |
800mV ±10% |
| connector type |
BNC |
| signal rise and fall time |
HD SDI |
270ps |
| SD SDI |
700ps |
| jitter |
less than 0.2UI |
- Analog AUDIO
| Connector |
TRS Jack 6.3mm |
| minimum load impedance |
32 Ohm |
| output amplitude |
5V p-p |
| frequency response ripple |
less than ±0.15dB from 20Hz to 20kHz |
| audio gain difference |
less than ±0.1dB |
| SNR |
better than 75dBu |
| Harmonic distortions and noise |
less than 0,07% |
| audio gain presets |
±6dB in 0.5dB increments |
Please note: no audio deembedding is possible for the 720P/25, 720P/29.9, 720P/30, 720P/24 and 720P/23.9 standards.
- HDMI
| standard compliance |
3G level A |
1080p/50 |
| 1080p/59.9 |
| 1080p/60 |
| 3G level B |
1080p/50 |
| 1080p/59.9 |
| 1080p/60 |
| 1080p/25 |
| 1080p/29.9 |
| 1080p/30 |
| 1080PsF/25 |
| 1080PsF/29.9 |
| 1080PsF/30 |
| HD SDI |
1080i/50 |
| 1080i/59.9 |
| 1080i/60 |
| 1080p/25 |
| 1080p/29.9 |
| 1080p/30 |
| 1080PsF/25 |
| 1080PsF/29.9 |
| 1080PsF/30 |
| 1035i/59.9 |
| 1035i/60 |
| 720p/50 |
| 720p/59.9 |
| 720p/60 |
| SD SDI |
576i/50 |
| 480i/60 |
PORC-7223 controls and indicators:
The indicators:
- LOSS - lit when SDI input is lost
- EDH/CRC/ASI ERROR MIN/HOUR - lit if two or more SDI EDH, 3G/HD SDI CRC or ASI errors were detected within one hour/minute interval
- RX FAULT - lit when an optical input is at fault or no optical signal detected
- ASI - lit when an input signal is recognized as ASI
- EDH DET - lit when an input SDI signal contains the EDH packets
- AUD DET - lit when an input 3G/HD/SD SDI has the embedded audio
- the main graphical display shows the current parameter value. Contents is organized as twelve pages scrollable by the MODE button
The MODE button toggles through all the modes, the UP and DOWN buttons edit them.
Configuring the PORC-7223 receiver
- the 1st page:
- upper line: input signal standard and embedded audio indication
- for 3G HD SDI the possible values are:
- 3G-A: 1080p/50; 1080p/59.94; 1080p/60; 1080p/24; 1080p/23.98; 1080I/50; 1080I/59.94; 1080I/60; 720p/50; 720p/60; 720p/59.94; 720p/25; 720p/24; 720p/23.98
- 3G-B: 1080i/50; 1080i/60; 1080i/50/94 (are indicated as 3G-B 1080/50, 60 and 59.94 respectively)
1080PsF/25; 1080PsF/30; 1080PsF/29.94 (are indicated as 3G-B 1080/50, 60 and 59.94 respectively)
1080p/30; 1080p/29.97; 1080p/25; 1080p/24; 1080p/23.98; 1080PsF/24; 1080PsF/23.98
- for HD SDI the possible values are:
1080i/50; 1080i/60; 1080i/59.94; 1080p/25; 1080p/25-EM; 1080p/30; 1080p/29.97; 1080p/24; 1080p/24-EM; 1080p/23.98; 1080p/23.98-EM;
1080PsF/25-EM; 1080PsF/24; 1080PsF/24-EM; 1080PsF/23.98; 1080PsF/23.98-EM; 1920x1035i/59.94
720p/50; 720p/50-EM; 720p/60; 720p/60-EM; 720p/59.94; 720p/59.94-EM; 720p/25; 720p/25-EM; 720p/30; 720p/30-EM; 720p/29.97; 720p/29.97-EM;
720p/24; 720p/24-EM; 720p/23.98; 720p/23.98-EM
- for SD SDI the possible values are:
625i/50; 525i/59.9
- lower line: embedded audio presence
- a number in a bracket denotes an audio group detected, for example: GR[1][2][3][4] all four groups have embedded audio, GR[1][-][-][-] group #1 only has embedded audio
- the 2nd page: input optical power indication
- upper line: RECEIVER
- lower line: input optical power level expressed in dBm. No meaningful values shown if outside of 0~ -40dBm range.
- the 3rd page: MON SELECT, audio channel pair selection for monitoring
- Note: the 3G/HD/SD SDI may embed up to eight channel pairs organized as four groups. Group #1 contains channel pairs #1/2 and #3/4, group #2 contains channel pairs #5/6 and #7/8, roup #3 contains channel pairs #9/10 and #11/12, roup #4 contains channel pairs #13/14 and #15/16 respectively. Only the preselected groups are monitorable, see the IND 1 ASSIGN and IND 2 ASSIGN menu entries
- the 4th page: MON VOLUME, audio monitoring level adjustment
- the headphone output level is adjustable in the ±6dB range
- the 5th page: VUMETER 1, the first bargraph OSD meter ON/OFF
- the 6th page: IND 1 ASSIGN, audio group selection for the first bargraph OSD level meter
- the possible values are GROUP 1, GROUP 2, GROUP 3 and GROUP 4
- the 7th page: IND 1 POS, the first bargraph OSD level meter horizontal position adjustment
- the 8th page: VUMETER 2, the second bargraph OSD meter ON/OFF
- the 9th page: IND 2 ASSIGN, audio group selection for the second bargraph OSD level meter
- the possible values are GROUP 1, GROUP 2, GROUP 3 and GROUP 4
- the 10th page: IND 2 POS, the second bargraph OSD level meter horizontal position adjustment
- the 11th page: VU METER SCALE selection
- DBFS: EBU alingment, 0dBFS corresponds to +18dBU
- DBU: quazi-analog, 0dBU corresponds to 0,775Vrms
- the 12th page: VU REF DBFS, the DBFS scale reference level setting
- the possible values are 0, -1, -2, -3, -4, -5, -6, -7, -8, -9, -10, -12, -14, -16, -18, -20, -22, -24, -26, -30 DBFS
- the 13th page: VU REF DBU, the DBU scale reference level setting
- the possible values are +9, +8, +7, +6, +5, +4, +3, +2, +1, 0, -1, -2, -3, -4, -5, -6, -8 -10, -12, -14, -16 DBU
- the 14th page: RECLOCKING, selection of "raw" or reclocked/reshaped signal at the electrical 3G/HD/SD SDI/ASI output
- should be enabled for 3G/HD/SD SDI signals, may be disabled for ASI signals
- the 15th page: EDH RESET, press the UD or DOWN buttons to reset the error counter
- the 16th page: 3G-B Stream selection for HDMI monitoring
A 3G Level B signal contains two 1.485Gbps streams. Select Stream1 or Stream2 for monitoring.
- the 17th page: Firmware, the model and the firmware version, f.e. PORC-7223 vX.X
PORC-7223 optical receiver provides the realtime optical power monitoring and wavelength reporting.
The remote control and management from a PC
All the PROFLEX™ modules are remote controllable from a PC. This facility is available if a rack is fitted with a CPU module (ordered separately).
|
